-->

Home network - Connect Home

- 8:20 AM

Connect:Homes Offers Affordable, Modern, Sustainable Homes | ArchDaily
photo src: www.archdaily.com

A home network or home area network (HAN) is a type of computer network that facilitates communication among devices within the close vicinity of a home. Devices capable of participating in this network, for example, smart devices such as network printers and handheld mobile computers, often gain enhanced emergent capabilities through their ability to interact. These additional capabilities can be used to increase the quality of life inside the home in a variety of ways, such as automation of repetitious tasks, increased personal productivity, enhanced home security, and easier access to entertainment.


Select Model to Customize - Connect Homes - Sustainable Modern ...
photo src: connect-homes.com


Maps, Directions, and Place Reviews



Origins

Establishing this kind of network is often necessary when there is need to distribute residential Internet access to all internet capable devices in the home. Due to the effect of IPv4 address exhaustion, most Internet service providers provide only a single WAN-facing IP address for each residential subscription. Therefore, most homes require a device capable of network address translation that can route packets between a single public address visible to the outside world and the multiple private addresses within the home network.


Connect Home Video



Components

A home network usually relies on one or more of the following equipment to establish physical layer, data link layer, and network layer connectivity both internally amongst devices and externally with outside networks:

  • A modem exposes an Ethernet interface to a service provider's native telecommunications infrastructure. In homes these usually come in the form of a DSL modem or cable modem.
  • A router manages network layer connectivity between a WAN and the HAN. Most home networks feature a particular class of small, passively cooled, table-top device with an integrated wireless access point and 4 port Ethernet switch. These devices aim to make the installation, configuration, and management of a home network as automated, user friendly, and "plug-and-play" as possible.
  • A network switch is used to allow devices on the home network to talk to one another via Ethernet. While the needs of most home networks are satisfied with the built-in wireless and/or switching capabilities of their router, certain situations require the introduction of a distinct switch. For example:
    • When the router's switching capacity is exceeded. Most home routers expose only 4 to 6 Ethernet ports.
    • When a non-standard port feature such as power over Ethernet is required by devices such as IP cameras and IP phones
    • When distant rooms have a large amount of wired devices in close proximity
  • A wireless access point is required for connecting wireless devices to a network. Most home networks rely on one wireless router combination device to fill this role.
  • A home automation controller enables low-power wireless communications with simple, non-data-intensive devices such as light bulbs and locks.
  • A network bridge connecting two network interfaces to each other, often in order to grant a wired-only device, e.g. Xbox, access to a wireless network medium.

photo src: www.jgdesign.co


Transmission media

Home networks can use either wired or wireless technologies to connect endpoints. Wireless is the predominant option in homes due to the ease of installation, lack of unsightly cables, and network performance characteristics sufficient for residential activities.

Wireless

IEEE 802.11 (WLAN)

One of the most common ways of creating a home network is by using wireless radio signal technology; the 802.11 network as certified by the IEEE. Most wireless-capable residential devices operate at a frequency of 2.4 GHz under 802.11b and 802.11g or 5 GHz under 802.11a. Some home networking devices operate in both radio-band signals and fall within the 802.11n or 802.11ac standards. Wi-Fi is a marketing and compliance certification for IEEE 802.11 technologies. The Wi-Fi Alliance has tested compliant products, and certifies them for interoperability.

IEEE 802.15 (WPAN)

Low power, close range communication based on IEEE 802.15 standards has a strong presence in homes. Bluetooth continues to be the technology of choice for most wireless accessories such as keyboards, mice, headsets, and game controllers. These connections are often established in a transient, ad-hoc manner and are not thought of as permanent residents of a home network.

IEEE 802.15.4 (LR-WPAN)

A "low-rate" version of the original WPAN protocol was used as the basis of ZigBee. Despite originally being conceived as a standard for low power machine-to-machine communication in industrial environments, the technology has been found to be well suited for integration into embedded "Smart Home" offerings that are expected to run on battery for extended periods of time. ZigBee utilizes mesh networking to overcome the distance limitations associated with traditional WPAN in order to establish a single network of addressable devices spread across the entire building. Z-Wave is an additional standard also built on 802.15.4, that was developed specifically with the needs of home automation device makers in mind.

Wired

Twisted pair cables

Most wired network infrastructures found in homes utilize Category 5 or Category 6 twisted pair cabling with RJ45 compatible terminations. This medium provides physical connectivity between the Ethernet interfaces present on a large number of residential IP-aware devices. Depending on the grade of cable and quality of installation, speeds of up to 10 Mbit/s, 100 Mbit/s, 1 Gbit/s, or 10Gbit/s are supported.

Fiber optics

Newer upscale neighborhoods can feature fiber optic cables running directly into the homes. This enables service providers to offer internet services with much higher bandwidth and/or lower latency characteristics associated with end-to-end optical signaling.

Telephone wires

  • VDSL and VDSL2
  • HomePNA support up to 160 Mbit/s

Coaxial cables

The following standards allow devices to communicate over coaxial cables, which are frequently installed to support multiple television sets throughout homes.

  • DOCSIS
  • The Multimedia over Coax Alliance (MoCA) standard can achieve up to 270 Mbit/s
  • CWave
  • HomePNA support up to 320 Mbit/s

Power lines

The ITU-T G.hn and IEEE Powerline standard, which provide high-speed (up to 1 Gbit/s) local area networking over existing home wiring, are examples of home networking technology designed specifically for IPTV delivery. Recently, the IEEE passed proposal P1901 which grounded a standard within the Market for wireline products produced and sold by companies that are part of the HomePlug Alliance. The IEEE is continuously working to push for P1901 to be completely recognized worldwide as the sole standard for all future products that are produced for Home Networking.

  • HomePlug and HomePNA are associated standards
  • Universal Powerline Association

Gallery of Connect:Homes Offers Affordable, Modern, Sustainable ...
photo src: www.archdaily.com


Endpoint devices and services

Traditionally, data-centric equipment such as computers and media players have been the primary tenants of a home network. However, due to the lowering cost of computing and the ubiquity of smartphone usage, many traditionally non-networked home equipment categories now include new variants capable of control or remote monitoring through an app on a smartphone. Newer startups and established home equipment manufacturers alike have begun to offer these products as part of a "Smart" or "Intelligent" or "Connected Home" portfolio. The control and/or monitoring interfaces for these products can be accessed through proprietary smartphone applications specific to that product line.

General purpose

  • Personal computers such as desktops, laptops, netbooks, and tablets
  • A network attached storage (NAS) device can be easily accessed via the CIFS or NFS protocols for general storage or for backup purposes.
  • A print server can be used to share any directly connected printers with other computers on the network.
  • IP phones or smartphones (when connected via Wi-Fi) utilizing VoIP technologies

Entertainment

  • Television: Some new TVs and DVRs include integrated WiFi connectivity which allows the user to access services such as Netflix and YouTube
  • Home audio: Digital audio players, and stereo systems with network connectivity can allow a user to easily access their music library, often using Bonjour to discover and interface with an instance of iTunes running on a remote PC.
  • Gaming: video game consoles rely on connectivity to the home network to enable a significant portion of their overall features, such as the multiplayer in games, social network integration, ability to purchase or demo new games, and receive software updates. Recent consoles have begun more aggressively pursuing the role of the sole entertainment and media hub of the home.
  • DLNA is a common protocol used for interoperability between networked media-centric devices in the home

Some older entertainment devices may not feature the appropriate network interfaces required for home network connectivity. In some situations, USB dongles and PCI Network Interface Cards are available as accessories that enable this functionality.

Lighting

  • "Connected" light bulbs such as Lifx, Phillips Hue, Samsung Smart Bulb, GE Link
  • ZigBee Light Link is the open standards protocol used by current major "Connected" light bulb vendors

Home security and access control

  • Security alarms: iSmartAlarm
  • Garage door and gate openers: Liftmaster MyQ, GoGogate

Environmental monitoring and conditioning

  • HVAC: Nest Learning Thermostat
  • Smoke/CO detectors: Nest Protect

ConnectHome sends free high-speed internet to low-income families ...
photo src: www.youtube.com


Network management

Embedded devices

Small standalone embedded home network devices typically require remote configuration from a PC on the same network. For example, broadband modems are often configured through a web browser running on a PC in the same network. These devices usually use a minimal Linux distribution with a lightweight HTTP server running in the background to allow the user to conveniently modify system variables from a GUI rendered in their browser. These pages use HTML forms extensively and make attempts to offer styled, visually appealing views that are also descriptive and easy to use.

Apple ecosystem devices

Apple devices aim to make networking as hidden and automatic as possible, utilizing a zero-configuration networking protocol called Bonjour embedded within their otherwise proprietary line of software and hardware products.

Microsoft ecosystem devices

Microsoft offers simple access control features built into their Windows operating system. Homegroup is a feature that allows shared disk access, shared printer access and shared scanner access among all computers and users (typically family members) in a home, in a similar fashion as in a small office workgroup, e.g., by means of distributed peer-to-peer networking (without a central server). Additionally, a home server may be added for increased functionality. The Windows HomeGroup feature was introduced with Microsoft Windows 7 in order to simplify file sharing in residences. All users (typically all family members), except guest accounts, may access any shared library on any computer that is connected to the home group. Passwords are not required from the family members during logon. Instead, secure file sharing is possible by means of a temporary password that is used when adding a computer to the HomeGroup.


Gallery of Connect:Homes Offers Affordable, Modern, Sustainable ...
photo src: www.archdaily.com


Home network security issues

This subject is not specific to home networks. New threats and related countering advice pop up continuously, here is an attempt to a list of issues:

  • Attention to Access control: which home network user properly authenticated, f.ex. using a good password, owns, may read, may write etc.. the different resources.
  • Attention to Encryption: which information is exchanged/stored in plaintext, which is encrypted into gibberish, and decrypted only for those with the necessary privileges.
  • Good password/passphrase management: How difficult is it for others to guess or crack by brute force, and impersonate members of the household to gain access to data; What is to be done if a password is forgotten?
  • Good backup practice: How to ensure the survival of important data in case a storage unit fails, or gets corrupted, or can no longer be decrypted, or if we suddenly need a several months older version of a file?
  • Attention to default settings: Which default settings of systems in the home network should not be left unchanged and therefore potentially known to others?
  • Attention to remote access: Which restrictions should we impose to the mechanisms for accessing the home network from Internet, thereby limiting number of people who can try to break in.
  • Timely SW updates: Since almost all SW sources regularly publish updates to their SW, what should we do to minimize the periods where we are using a version that is not the latest; i.e. potentially containing known vulnerabilities.
  • Avoiding the use of technologies and devices with known security vulnerabilities, or from suppliers not worthy of trust, not likely to publish updates, thereby avoiding risk when a new release addressing possible vulnerabilities is not published or published but is not yet upgraded in the home network.
  • Proper logout and attention to other browser remembered info: passwords, automatically filled in form-field values, cut-paste-buffer content, undo-redo type of info, cookie content, etc.. that might contain security sensitive info and the browser may be tricked by a web site being visited to reveal them.
  • Use of Firewalls and Security Software so that many security measures may be carried out automatically and in real time.
  • Use of two factor authentication so that even if passwords are guessed or revealed, impersonating members of the household to gain access to their files is not possible.
  • Monitoring suspicious activity so that network activity not consistent with our use pattern may reveal security breaches.
  • Practicing safe surfing in order to avoid infection: being skeptical about clicking links, opening files that may be masquerading as harmless, visiting sites that may not be professionally managed or may be malicious, allowing scripts or apps to run locally, connecting USB disks to own PC, social engineering attempts, etc..


..and some debatable security by obscurity measures:

  • Positioning the Router or Access Point Strategically, so neighbors and people in streets nearby can not access home network wirelessly.
  • Turning Off the Network During Extended Periods of Non-Use to reduce time for exposure to hackers attempts.
  • Disabling SSID Broadcast, so our network does not show in the list of networks accessible on a passerby's device.
  • Assigning Static IP Addresses to Devices so the Internet equivalent of cold calling to a computer may not be feasible due to lack of an easily guessed "door/telephone number".
  • Enabling MAC Address Filtering so that the specific network access card may not be addressed directly and possibly accessed maliciously.

Samsung is also making mesh Wi-Fi routers, but they work with ...
photo src: www.theverge.com


Common infrastructure issues

Wireless signal loss

The wireless signal strength of the standard residential wireless router may not be powerful enough to cover the entire house or may not be able to get through to all floors of multiple floor residences. In such situations, the installation of one or more wireless repeaters may be necessary.

"Leaky" Wi-Fi

WiFi often extends beyond the boundaries of a home and can create coverage where it is least wanted, offering a channel through which non-residents could compromise a system and retrieve personal data. To prevent this it is usually sufficient to enforce the use of authentication, encryption, or VPN that requires a password for network connectivity.

However new Wi-Fi standards working at 60 GHz, such as 802.11ad, enable confidence that the LAN will not trespass physical barriers, as at such frequencies a simple wall would attenuate the signal considerably.

Electrical grid noise

For home networks relying on powerline communication technology, how to deal with electrical noise injected into the system from standard household appliances remains the largest challenge. Whenever any appliance is turned on or turned off it creates noise that could possibly disrupt data transfer through the wiring. IEEE products that are certified to be HomePlug 1.0 compliant have been engineered to no longer interfere with, or receive interference from other devices plugged into the same home's electrical grid.


Gallery of Connect:Homes Offers Affordable, Modern, Sustainable ...
photo src: www.archdaily.com


Platforms

The convenience, availability, and reliability of externally managed cloud computing resources continues to become an appealing choice for many home-dwellers without interest or experience in IT. For these individuals, the subscription fees and/or privacy risks associated with such services are often perceived as lower cost than having to configure and maintain similar facilities within a home network.

There are increased offerings of service providers' triple play solutions which are usually bundled with Modem/Router/WiFi combination devices that require nothing but the setting of a password to complete configuration. In such situations the home-dweller no longer requires the purchase of an additional routing device to distribute internet access throughout the home--It also obviates the need for the home-dweller having even the most basic understanding of networking technology.

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search